LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2009 >> M45 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Lighting System) >> Headlight Dimmer Switch >> Installation

Headlight Dimmer Switch: Installation

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY 
    1. Insert the headlight dimmer switch assembly onto the steering column while making sure that the switch's protrusions align with the shaft's cutout parts.
      Fig 1: Locating Headlight Dimmer Switch Assembly
      G05160924Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. While loosening the band clamp, attach the claw to install the headlight dimmer switch assembly.
      3. Fig 2: Locating Headlight Dimmer Switch Assembly Connector
      G05160921Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Connect the connector.
  2. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY 
    1. Attach the claw to install the windshield wiper switch.
      2. Fig 3: Locating Windshield Wiper Switch Assembly Connectors
      G05160920Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the connectors.
  3. INSTALL SPIRAL CABLE SUB-ASSEMBLY  (See INSTALLATION )
  4. INSTALL TILT AND TELESCOPIC MANUAL SWITCH (for Power Tilt and Power Telescopic)  (See INSTALLATION )
  5. INSTALL UPPER STEERING COLUMN COVER (for Manual Tilt)  (See INSTALLATION )
  6. INSTALL UPPER STEERING COLUMN COVER (for Manual Tilt and Telescopic)  (See INSTALLATION )
  7. INSTALL UPPER STEERING COLUMN COVER (for Power Tilt and Power Telescopic)  (See INSTALLATION )
  8. INSTALL LOWER STEERING COLUMN COVER (for Manual Tilt)  (See INSTALLATION )
  9. INSTALL LOWER STEERING COLUMN COVER (for Manual Tilt and Telescopic)  (See INSTALLATION )
  10. INSTALL LOWER STEERING COLUMN COVER (for Power Tilt and Power Telescopic)  (See INSTALLATION )
  11. INSTALL STEERING WHEEL ASSEMBLY  (See INSTALLATION )
  12. INSTALL STEERING PAD (w/ Steering Pad Switch)  (See INSTALLATION )
  13. INSTALL STEERING PAD (w/o Steering Pad Switch)  (See INSTALLATION )
  14. INSTALL LOWER NO. 3 STEERING WHEEL COVER  (See INSTALLATION )
  15. INSTALL LOWER NO. 2 STEERING WHEEL COVER  (See INSTALLATION )
  16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE: Some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).
  17. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light (see DIAGNOSIS SYSTEM ).
scientia non olet · About LEMON Manuals