Headlight Assembly: Removal

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Use the same procedures for the RH and LH side.
The procedures listed below are for the LH side.

REMOVE FRONT END PANEL LH (See REMOVAL )
REMOVE HEADLIGHT ASSEMBLY LH
1. Remove the 2 screws.
2. Remove the bolt.
  
  Fig 1: dentifying Headlight Assembly Screws And Bolt LH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Disconnect the connectors and remove the headlight.