Front Door Courtesy Switch: Installation

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Use the same procedures for the RH and LH side.
The procedures listed below are for the LH side.
A bolt without a torque specification is shown in the standard bolt chart (see SPECIFIED TORQUE FOR STANDARD BOLTS ).

INSTALL FRONT DOOR COURTESY SWITCH
1. Connect the connector.
2. Install the courtesy switch with the bolt.
  
  Fig 1: Identifying Front Door Courtesy Switch Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002