LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2009 >> M45 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Transfer Case -JF1A) >> Transfer Assembly >> Removal

Transfer Assembly: Removal

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
  1. DRAIN TRANSFER OIL  (see REPLACEMENT  )
  2. REMOVE AUTOMATIC TRANSMISSION WITH TRANSFER ASSEMBLY (for A750F) 
    1. Remove the automatic transmission with transfer assembly (see REMOVAL ).
  3. REMOVE AUTOMATIC TRANSMISSION WITH TRANSFER ASSEMBLY (for AB60F) 
    1. Remove the automatic transmission with transfer assembly (see REMOVAL ).
  4. REMOVE TRANSFER ASSEMBLY 
    1. Remove the 8 transfer adaptor rear mounting bolts.
    2. Pull the transfer straight up and remove it from the transmission.
      NOTE: Take care not to damage the rear adaptor oil seal with the transfer input gear spline.
      Fig 1: Removing Transfer Assembly
      G05158955Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals