4WD Control Ecu: Installation

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL 4WD CONTROL ECU
1. Install the ECU with the bolt.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
2. Connect the 2 ECU connectors.
  
  Fig 1: Identifying Bolt And ECU Connectors
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH (See INSTALLATION )
INSTALL INSTRUMENT SIDE PANEL RH (See INSTALLATION )
INSTALL COWL SIDE TRIM BOARD RH
1. Install the cowl side trim board RH (see INSTALLATION ).
  HINT:
  
  Use the same procedures described for the LH side.
INSTALL FRONT DOOR SCUFF PLATE RH (for Regular Cab)
1. Install the front door scuff plate RH (see INSTALLATION ).
  HINT:
  
  Use the same procedures described for the LH side.
INSTALL FRONT DOOR SCUFF PLATE RH (for Double Cab, for CrewMax)
1. Install the front door scuff plate RH (See INSTALLATION ).
  HINT:
  
  Use the same procedures described for the LH side.