AWD Models
WARNING: This page is about a different car, the 2008 Infiniti M45 and 2008 Infiniti M35. However, it is still accessible from the selected car via links, so may be relevant.
SERVICE DATA AND SPECIFICATIONS (AWD MODELS)
| Applied model | VQ35DE | VK45DE | ||
| Front | Propeller shaft model | 2S56A | ||
| Number of joints | 2 | |||
| Type of journal bearings (Non-disassembly type) | Shell type | |||
| Coupling method with transfer | Sleeve type | |||
| Coupling method with front final drive | Flange type | |||
| Shaft length (Spider to spider) | 763 mm (30.04 in) | |||
| Shaft outer diameter | 42.7 mm (1.68 in) | |||
| Rear | Propeller shaft model | 3F80A-1VL107 | 3F-R-2VL107 | |
| Number of joints | 3 | |||
| Type of journal bearings (Non-disassembly type) | 1st joint | Shell type | Rubber coupling type | |
| 2nd joint | Shell type | Rebro joint type | ||
| 3rd joint | Rebro joint type | |||
| Coupling method with transfer | Flange type | |||
| Coupling method with rear final drive | Flange type | |||
| Shaft length | 1st (Spider to spider) | 399 mm (15.71 in) | 404 mm (15.91 in) | |
| 2nd (Spider to rebro joint center) | 803 mm (31.61 in) | 802 mm (31.57 in) | ||
| Shaft outer diameter | 1st | 82.6 mm (3.25 in) | ||
| 2nd | 82.6 mm (3.25 in) | |||