2WD Models
WARNING: This page is about a different car, the 2008 Infiniti M45 and 2008 Infiniti M35. However, it is still accessible from the selected car via links, so may be relevant.
SERVICE DATA AND SPECIFICATIONS (2WD MODELS)
| Applied model |
VQ35DE |
VK45DE |
| Propeller shaft model |
3S80A-1VL107 |
3F-R-2VL107 |
| Number of joints |
3 |
| Type of journal bearings (Non-disassembly type) |
1st joint |
Shell type |
Rubber coupling type |
| 2nd joint |
Shell type |
Rebro joint type |
| 3rd joint |
Rebro joint |
Type Rebro joint type |
| Coupling method with transmission |
Sleeve type |
Flange type |
| Coupling method with rear final drive |
Flange type |
| Shaft length |
1st |
724 mm (28.50 in) |
739 mm (29.09 in) |
| 2nd |
803 mm (31.61 in) |
802 mm (31.57 in) |
| Shaft outer diameter |
1st |
82.6 mm (3.25 in) |
| 2nd |
82.6 mm (3.25 in) |