LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2009 >> M45 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (Front Final Drive) >> Preparation >> Special Service Tools

Special Service Tools

WARNING: This page is about a different car, the 2008 Infiniti M45 and 2008 Infiniti M35. However, it is still accessible from the selected car via links, so may be relevant.

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.

SPECIAL SERVICE TOOLS SPECIFICATION

Tool number
(Kent-Moore No.)
Tool name		 Description
KV381054S0
(J-34286)
Puller
G04875581Courtesy of NISSAN MOTOR CO., U.S.A.
  • Removing front oil seal
  • Removing side oil seal (right side)
  • Removing side bearing outer race
ST33400001
(J-26082)
Drift
  1. 60 mm (2.36 in) dia.
  2. 47 mm (1.85 in) dia.
G04901806Courtesy of NISSAN MOTOR CO., U.S.A.
  • Installing front oil seal
  • Installing side oil seal (right side)
KV38102510
( - )
Drift
  1. 71 mm (2.80 in) dia.
  2. 65 mm (2.56 in) dia.
G04888832Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing front oil seal
KV38102100
(J-25803-01)
Drift
  1. 44 mm (1.73 in) dia.
  2. 36 mm (1.42 in) dia.
  3. 24.5 mm (0.965 in) dia.
G05211385Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing side oil seal (left side)
ST30032000
(J-26010-01)
Drift
  1. 80 mm (3.15 in) dia.
  2. 38 mm (1.50 in) dia.
  3. 31 mm (1.22 in) dia.
G05225441Courtesy of NISSAN MOTOR CO., U.S.A.
  • Installing pinion rear bearing inner race
  • Installing side shaft
ST3127S000
(J-25765-A)
Preload gauge
  1. GG91030000

    (J-25765)

    Torque wrench

  2. HT62940000

    ( - )

    Socket adapter (1/2")

  3. HT62900000

    ( - )

    Socket adapter (3/8")
G04876269Courtesy of NISSAN MOTOR CO., U.S.A.
 Measuring pinion bearing preload and total preload
KV10111100
(J-37228)
Seal cutter
G04876270Courtesy of NISSAN MOTOR CO., U.S.A.
 Removing carrier cover
ST3306S001
(J-22888-D)
Differential side bearing puller set
  1. ST33051001

    (J-22888-20)

    Puller

  2. ST33061000

    (J-8107-2)

    Base

    1. 28.5 mm (1.122 in) dia.
    2. 38 mm (1.50 in) dia.
G04876271Courtesy of NISSAN MOTOR CO., U.S.A.
 Removing and installing side bearing inner race
KV31103000
(J-38982)
Drift
  1. 49 mm (1.93 in) dia.
  2. 70 mm (2.76 in) dia.
G05225446Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing side bearing outer race
ST30611000
(J-25742-1)
Drift bar
G04876275Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing side bearing outer race (Use with KV31103000)
ST37820000
( - )
Drift
  1. 39 mm (1.54 in) dia.
  2. 72 mm (2.83 in) dia.
G04921332Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing pinion front and rear bearing outer race
ST33230000
(J-25805-01)
Drift
  1. 51 mm (2.01 in) dia.
  2. 41 mm (1.61 in) dia.
  3. 28.5 mm (1.122 in) dia.
G05211394Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing side bearing inner race
KV38100200
( - )
Drift
  1. 66 mm (2.56 in) dia.
  2. 49 mm (1.93 in) dia.
G04876266Courtesy of NISSAN MOTOR CO., U.S.A.
 Installing side shaft oil seal
scientia non olet · About LEMON Manuals