LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2009 >> M45 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Brake Control System) >> VDC/TCS/Abs >> G-Sensor >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2008 Infiniti M45 and 2008 Infiniti M35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove center console. Refer to "COMPONENT PARTS DRAWING ".
  2. Disconnect yaw rate/side G sensor harness connector.
  3. Remove mounting bolts. Remove yaw rate/side G sensor (1).
    Fig 1: Identifying Yaw Rate/Side G Sensor
    G05211868Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals