LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2009 >> M45 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Transfer Case) >> AWD Control Unit >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2008 Infiniti M45 and 2008 Infiniti M35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the dash side finisher. Refer to "BODY SIDE TRIM ".
  2. Disconnect AWD control unit connector.
  3. Remove the AWD control unit.
    Fig 1: AWD Control Unit With Torque Specification
    G05211285Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals