Systems Controlled By IPDM E/R
- Lamp control
Using CAN communication, it receives signal from BCM and controls the following lamps:
- Headlamps (HI, LO)
- Tail, parking and license plate lamps
- Front fog lamps
- Daytime light relay control (for Canada models)
Using CAN communication, it receives signals from BCM and controls the daytime light relay.
- Wiper control
Using CAN communication, it receives signals from BCM and controls the front wipers.
- Rear window defogger relay control
Using CAN communication, it receives signals from BCM and controls the rear window defogger relay.
- A/C compressor control
Using CAN communication, it receives signals from ECM and controls the A/C relay.
- Cooling fan control
Using CAN communication, it receives signals from ECM and controls cooling fan via cooling fan control module.
- Horn control
Using CAN communication, it receives signals from BCM and controls horn relay.
- Starter motor relay control
Using CAN communication, it receives signals from BCM and controls starter motor relay.
- Alternator control
Using CAN communication, it receives signal from ECM and controls power generation voltage.