Terminal and Reference Value for BCM
BCM TERMINAL AND REFERENCE VALUE
| Terminal | Wire color | Item | Signal Input/Output | Condition | Voltage (V) Approx. |
|---|---|---|---|---|---|
| 11 | V | Ignition switch (ACC) | Input | Ignition switch is in ACC or ON position | Battery voltage |
| 12 | P | Front door switch passenger side | Input | Door open (ON) → Close (OFF) | 0 → 8 |
| 13 | O/L | Rear door switch RH | Input | Door open (ON) → Close (OFF) | 0 → Battery voltage |
| 37 | LG | Key switch signal | Input | Insert Intelligent Key into key slot. | Battery voltage |
| Remove Intelligent Key from key slot. | 0 | ||||
| 38 | W | Ignition switch (ON) | Input | Ignition switch is in ON or START position. | Battery voltage |
| 39 | L | CAN-H | Input/Output | - | - |
| 40 | P | CAN-L | Input/Output | - | - |
| 42 | P | Power supply (fuse) | Input | - | Battery voltage |
| 52 | B | Ground | - | - | 0 |
| 55 | W | Power supply (Fusible link) | Input | - | Battery voltage |
| 57 | SB | Trunk room lamp switch | Input | Trunk lid open (ON) → Close (OFF) | 0 → Battery voltage |
| 62 | V | Front door switch driver side | Input | Door open (ON) → Close (OFF) | 0 → Battery voltage |
| 63 | R/G | Rear door switch LH | Input | Door open (ON) → Close (OFF) | 0 → Battery voltage |
| *1: In the state that hazard reminder operates. *2: In the state that room lamp switch is in "DOOR" position. |
|||||