LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2009 >> M35 x >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Brake Control System) >> G Sensor >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2008 Infiniti FX45 and 2008 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove center console. Refer to "(H) CENTER CONSOLE ".
  2. Disconnect G sensor harness connector.
  3. Remove G sensor mounting bolts. Then remove G sensor from vehicle.
    CAUTION:
    • Do not drop or strike G sensor, because it has little endurance to impact.
    • Do not use power tool etc., because G sensor is weak for the impact.
      • Fig 1: G Sensor With Torque Specifications
      G05220563Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals