Removal and Installation: Overview

WARNING: This page is about a different car, the 2008 Infiniti M45 and 2008 Infiniti M35. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Securely insert harness connector to pressure sensor.
Insert hose securely until it contacts tube spool (Do not apply fluid).

Fig 1: Inserting Tube To Hose
Courtesy of NISSAN MOTOR CO., U.S.A.
Install eye-bolt with eye-joint (assembled to high-pressure hose) protrusion facing with pump side cutout, and then tighten it to the specified torque after tightening by hand.

Fig 2: Identifying Eye-Bolt With Eye-Joint
Courtesy of NISSAN MOTOR CO., U.S.A.