LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2009 >> M35 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Lighting System) >> Stop Lamp >> High-Mounted Stop Lamp >> Bulb Replacement, Removal And Installation

Bulb Replacement, Removal And Installation

WARNING: This page is about a different car, the 2008 Infiniti FX45 and 2008 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove cap from back door finisher and remove nuts. Refer to "REMOVAL AND INSTALLATION ".
  2. Disconnect high-mounted stop lamp connector.
  3. Remove washer tube from high-mounted stop lamp, and remove high-mounted stop lamp from the rear air spoiler.
  4. Remove seal packing from the rear air spoiler.
  5. Installation is the reverse order of removal.

    High-mounted stop lamp : LED 

    Fig 1: Identifying High-Mounted Stop Lamp
    G05222167Courtesy of NISSAN MOTOR CO., U.S.A.
CAUTION: Seal packing cannot be reused.
scientia non olet · About LEMON Manuals