Terminal and Reference Value for Power Window Main Switch
WARNING: This page is about a different car, the 2008 Infiniti FX45 and 2008 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
TERMINAL AND REFERENCE VALUE CHART FOR POWER WINDOW MAIN SWITCH
| Terminal | Wire color | Item | Signal Input/Output | Condition | Voltage [V] (Approx.) |
|---|---|---|---|---|---|
| 1 | Y | Rear LH power window UP signal | Output | When rear LH switch in power window main switch is UP at operated. | Battery voltage |
| 2 | SB | Limit switch and encoder ground | - | - | 0 |
| 3 | R | Rear LH power window DOWN signal | Output | When rear LH switch in power window main switch is DOWN at operated. | Battery voltage |
| 4 | P | Door key cylinder switch LOCK signal | Input | Key position (Neutral - Locked) | 5 ← 0 |
| 5 | G | Rear RH power window DOWN signal | Output | When rear RH switch in power window main switch is DOWN at operated. | Battery voltage |
| 6 | OR | Door key cylinder switch UNLOCK signal | Input | Key position (Neutral - Unlocked) | 5 ← 0 |
| 7 | LG | Rear RH power window UP signal | Output | When rear RH switch in power window main switch is UP at operated. | Battery voltage |
| 8 | L | Front driver side power window motor UP signal | Output | When front LH switch in power window main switch is UP at operated | Battery voltage |
| 9 | GY | Limit switch signal | Input | Driver side door window is between fully-open and just before fully-closed position (ON) | 0 |
| Driver side door window is between just before fullyclosed position and fullyclosed position (OFF) | 5 | ||||
| 10 | BR | Rap signal | Input | IGN SW ON | Battery voltage |
| Within 45 second after ignition switch is turned to OFF | Battery voltage | ||||
| When driver side or passenger side door open in power window timer is operates | 0 | ||||
| 11 | B | Front driver side power window motor DOWN signal | Output | When front LH switch in power window main switch is DOWN at operated | Battery voltage |
| 13 | PU | Encoder pulse signal | Input | When power window motor operates. | |
| 14 | Y | Power window serial link | Input/Output | IGN SW ON or power window timer operating. | |
| 15 | W | Encoder power supply | Output | When ignition switch ON or power window timer operates | 10 |
| 17 | B | Ground | - | - | 0 |
| 19 | W | Battery power supply | Input | - | Battery voltage |