Removal and Installation of Rear View Camera: Removal

WARNING: This page is about a different car, the 2008 Infiniti FX45 and 2008 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.

Remove back door trim. Refer to "BACK DOOR TRIM ".
Remove back door outside finisher upper. Refer to "BACK DOOR FINISHER ".
Remove licence lamp bolts (A).

Fig 1: Identifying Licence Lamp Bolts
Courtesy of NISSAN MOTOR CO., U.S.A.
Disconnect rear wiper connector.
Disconnect rear view camera connector (1) and back door opener switch connector (2).

Fig 2: Identifying Rear Wiper And Back Door Opener Switch Connector

Courtesy of NISSAN MOTOR CO., U.S.A.

Cut off back door module along the line (A).
Remove back door opener switch and rear view camera assembly (3).
- Rear wiper (4)
Remove screws (A), and remove rear view camera (1) from back door opener switch (2).

Fig 3: Identifying Screws And Rear View Camera

Courtesy of NISSAN MOTOR CO., U.S.A.