Preliminary Check
WARNING: This page is about a different car, the 2008 Infiniti FX45 and 2008 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK OPERATION OF SELF-DIAGNOSIS MODE (COMBINATION METER)
Perform self-diagnosis mode of combination meter. Refer to "OPERATION PROCEDURE ".
Does self-diagnosis function operate?
YES: GO TO 2.
NO: GO TO 3.
- CHECK UNIFIED METER AND A/C AMP. (CONSULT-III)
Perform self-diagnosis of unified meter and A/C amp. Refer to "CONSULT-III FUNCTION (METER A/C AMP) ".
Self-diagnosis results
No malfunction detected >> INSPECTION END
Malfunction detected >> Check applicable parts, and repair or replace corresponding parts.
- CHECK POWER SUPPLY AND GROUND CIRCUIT OF COMBINATION METER
Check power supply and ground circuit of combination meter. Refer to "POWER SUPPLY AND GROUND CIRCUIT INSPECTION ".
OK or NG
OK: Check odo/trip meter switch. Refer to "ODO/TRIP METER AND ILLUMINATION CONTROL SWITCH INSPECTION ".
NG: Repair malfunctioning part.