Inspection Procedure

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

After the inspection completed, clear the DTCs (see DTC CHECK/CLEAR ).

NOTE:

This code may be output even if there is no malfunction.
If this code is output frequently, replace the navigation receiver.

CLEAR DTC
1. Clear the DTCs (see DTC CHECK/CLEAR ).

RECHECK DTC

Recheck for DTCs and check if the same trouble occurs again.

OK: Malfunction disappears.

Result

DTC RESULT CHART

Result	Proceed to
OK	A
NG (for Column Shift Type)	B
NG (for Floor Shift Type)	C

B: REPLACE NAVIGATION RECEIVER (see REMOVAL (For Column Shift Type) )

C: REPLACE NAVIGATION RECEIVER (see REMOVAL (For Floor Shift Type) )

A: END (THIS CODE MAY BE OUTPUT EVEN IF THERE IS NO MALFUNCTION)