DTC 01-DC Transmission Error: Description
WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
DTC TROUBLE DETECTION CONDITION CHART
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| 01-DC | Transmission to component shown by subcode is failed. (Detecting this DTC does not always mean actual failure.) |
If same sub-code is recorded in other components, check harness for power supply and communication system of all components shown by code |
HINT:
This code may be stored if engine started, idled 60 seconds and then the ignition switch is turned to the START position again.
NOTE:
- The navigation receiver is the master unit.
- Be sure to clear and recheck DTCs after the inspection is completed to confirm that no DTCs are output.