Inspection Procedure

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

After the inspection is completed, clear the DTCs.

NOTE:

These codes may be output even if there is no malfunction.
If these codes are output frequently, replace the radio receiver for Column shift type (see REMOVAL ) or Floor shift type (see REMOVAL ).

CLEAR DTC
1. Clear the DTCs (see DTC CHECK / CLEAR ).

RECHECK DTC

Recheck for DTCs and check if the same trouble occurs again.

OK: Malfunction disappears.

Result:

RESULT REFERENCE

Result	Proceed to
OK	A
NG (for Column Shift Type)	B
NG (for Floor Shift Type)	C

B: REPLACE RADIO RECEIVER (see REMOVAL )

C: REPLACE RADIO RECEIVER (see REMOVAL )

A: END (THIS CODE MAY BE OUTPUT EVEN IF THERE IS NO MALFUNCTION)