Inspection Procedure
WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
- PRESS "EJECT" AND CHECK OPERATION
- Press the CD EJECT switch of the radio receiver for 2 seconds or more and check that the CD is ejected.
OK: CD is ejected.
Result:
RESULT REFERENCEResult Proceed to OK A NG (for Column Shift Type) B NG (for Floor Shift Type) C
B: REPLACE RADIO RECEIVER (see REMOVAL )
C: REPLACE RADIO RECEIVER (see REMOVAL )
A: Go to next step.
- Press the CD EJECT switch of the radio receiver for 2 seconds or more and check that the CD is ejected.
- REPLACE CD WITH ANOTHER AND RECHECK
- Insert another CD and check if it is ejected.
OK: CD is ejected.
Result:
RESULT REFERENCEResult Proceed to OK A NG (for Column Shift Type) B NG (for Floor Shift Type) C
B: REPLACE RADIO RECEIVER (see REMOVAL )
C: REPLACE RADIO RECEIVER (see REMOVAL )
A: END
- Insert another CD and check if it is ejected.