Washer Motor: Removal

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE WINDSHIELD WASHER JAR ASSEMBLY
1. Disconnect the connector.
2. Remove the clip and 3 bolts. Then remove the washer jar.
  
  Fig 1: Locating Windshield Washer Jar Clips And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
DRAIN WASHER FLUID
1. Remove the washer hose from the windshield washer motor and pump, and drain the washer fluid.
  
  Fig 2: Identifying Washer Hose
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY
1. Pull out the washer motor and pump from the packing of the washer jar to remove it.
  
  Fig 3: Identifying Windshield Washer Motor And Pump Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002