Washer Motor: Inspection

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY
HINT:

This check should be performed with the windshield washer motor and pump installed to the washer jar.
1. Fill the washer jar with washer fluid.
2. Connect the battery's positive (+) lead to terminal 1 and the negative (-) lead to terminal 2 of the washer motor and pump.
3. Check that washer fluid flows from the washer jar.
  OK: Washer fluid flows from washer jar.
  
  If the result is not as specified, replace the washer motor and pump assembly.
  
  Fig 1: Inspecting Windshield Washer Motor And Pump Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002