Knock Sensor: Inspection
WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT KNOCK SENSOR
- Measure the resistance according to the value(s) in the table below.
Standard resistance
STANDARD RESISTANCE SPECIFICATION
| Tester Connection |
Condition |
Specified Condition |
| 1 - 2 |
20°C (68°F) |
120 to 280 kΩ |
If the result is not as specified, replace the sensor.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002