Fuel Pump: Reassembly

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL FUEL PUMP
1. Install the fuel pump harness.
  
  Fig 1: Locating Fuel Pump Harness
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Apply a light coat of gasoline to a new O-ring. Then install the O-ring and spacer to the fuel pump.
  
  Fig 2: Identifying Fuel Pump O-Ring And Spacer
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Attach the 5 claws to the claw holes and install the fuel pump and suction plate with filter.
  
  Fig 3: Locating Claws Fuel Pump
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SUB TANK SUB-ASSEMBLY
1. Attach the 2 claws to the claw holes and install the fuel sub tank.
  
  Fig 4: Locating Fuel Sub Tank Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Attach the 3 claws to the claw holes.
  
  Fig 5: Identifying Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the fuel tube.
  
  Fig 6: Locating Fuel Tube
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Install the tube part to the sub tank.
  1. Attach the claw on the end of the tube to the claw hole. Install the tube to the 2 clamps on the fuel sub tank.
    
    Fig 7: Attaching Claw On End Of Tube To Claw Hole
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Connect the fuel pump connector.
  
  Fig 8: Locating Fuel Pump Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FUEL SENDER GAUGE
1. Set the sender gauge to the fuel sub tank. Then slide the sender gauge downward to install it.
  
  Fig 9: Setting Sender Gauge To Fuel Sub Tank
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the fuel sender gauge connector.