LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2009 >> M35 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Engine Fuel System (2UZ-FE)) >> Fuel Pump >> Installation

Fuel Pump: Installation

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY  (see INSTALLATION  )
  2. INSTALL FUEL TANK ASSEMBLY  (see INSTALLATION  )
  3. CONNECT NO. 1 CANISTER OUTLET HOSE  (see INSTALLATION  )
  4. CONNECT FUEL TANK TO FILLER PIPE HOSE  (see INSTALLATION  )
  5. CONNECT FUEL TANK TO CANISTER TUBE  (see INSTALLATION  )
  6. CONNECT WIRE HARNESS  (see INSTALLATION  )
  7. CONNECT VENT LINE HOSE  (see INSTALLATION  )
  8. CONNECT FUEL TANK RETURN TUBE  (see INSTALLATION  )
  9. CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY  (see INSTALLATION  )
  10. INSTALL NO. 1 FUEL TANK PROTECTOR SUB-ASSEMBLY (for Rough Road Area Specification Vehicles)  (see INSTALLATION  )
  11. INSTALL FUEL TANK CAP ASSEMBLY 
  12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE: Some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).
  13. INSPECT FOR FUEL LEAK  (see INSTALLATION  )
scientia non olet · About LEMON Manuals