Diagnosis Procedure
- CHECK CONTINUITY RGB (R: RED) SIGNAL CIRCUIT
- Turn ignition switch OFF.
- Disconnect rear display unit connector and video distributor connector.
- Check continuity between rear display unit harness connector terminal 24 and video distributor harness connector terminal 25.
24 - 25 : Continuity should exist .
- Check continuity between rear display unit harness connector terminal 24 and ground.
24 - Ground : Continuity should not exist .
Is the inspection result normal?
YES: GO TO 2.
NO: Repair harness or connector.
- CHECK RGB (R: RED) SIGNAL
- Connect rear display unit connector and video distributor connector.
- Turn ignition switch ON.
- Check signal between rear display unit harness connector terminal 24 and ground.
TERMINAL VALUE REFERENCETerminal Condition Reference value 24 - Ground Ignition switch ON Rear seat remote controller operation when AUX or DVD image is displayed on rear display unit. Is the inspection result normal?
YES: Replace rear display unit.
NO: Replace video distributor.