Physical Values
WARNING: This page is about a different variant/trim than selected.
POWER WINDOW SUB-SWITCH PHYSICAL VALUES
| Terminal No. (Wire color) | Description | Condition | Voltage [V] (Approx.) | ||
|---|---|---|---|---|---|
| + | - | Signal name | Input/Output | ||
| 3 (G) | Ground | Encoder ground | - | - | 0 |
| 4 (O) | Ground | Encoder power supply | Output | When ignition switch ON or automatic window operates adjusting | Battery voltage |
| 8 LHD (L) RHD (GR) | Ground | Power window motor UP signal | Output | When power window motor is operated UP | Battery voltage |
| 9 LHD (BR) RHD (P) | Ground | Power window motor DOWN signal | Output | When power window motor is operated DOWN | Battery voltage |
| 10 (SB) | Ground | Battery power supply | Input | - | Battery voltage |
| 11 (B) | Ground | Ground | - | - | 0 |
| 12 (R) | Ground | Encoder pulse signal 1 | Input | When power window motor operates | |
| 15 LHD (LG) RHD (SB) | Ground | Encoder pulse signal 2 | Input | When power window motor operates | |
| 16 (Y) | Ground | Power window serial link | Input/Output | Ignition switch ON | |