DRIVER SIDE : Component Inspection
- CHECK SEAT BELT BUCKLE SWITCH (DRIVER SIDE)
- Turn ignition switch OFF.
- Disconnect seat belt buckle switch connector.
- Check continuity of seat belt buckle (driver side).
CONTINUITY CHART
| Seat belt buckle switch (driver side) | Condition | Continuity | |
|---|---|---|---|
| Terminal | |||
| 1 | 2 | When driver side seat belt is not fastened | Not existed |
| When driver side seat belt is fastened | Existed | ||
Is the inspection result normal?
YES: INSPECTION END
NO: Replace seat belt buckle switch (driver side).