LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2009 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Seats >> Seats -- Convertible >> DTC/Circuit Diagnosis >> Power Walk-In Switch >> Driver Side >> DRIVER SIDE : Component Function Check

DRIVER SIDE : Component Function Check

  1. CHECK FUNCTION
    1. Turn ignition switch ON.
    2. Select "WALK-IN SW" in the "Data Monitor" mode using CONSULT-III.
    3. Check the power walk-in switch signal under the following condition.
      TEST ITEM CONDITION CHART

      Test item Condition Status
      WALK-IN SW Power walk-in switch Pressed ON
      Released OFF

      Is the indication normal? 

      YES: Power walk-in switch function is OK.

      NO: Refer to "DRIVER SIDE : DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals