LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2009 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Seats >> Automatic Drive Positioner -- Convertible >> DTC/Circuit Diagnosis >> Tilt Sensor >> Component Function Check

Component Function Check

  1. CHECK FUNCTION
    1. Turn ignition switch ON.
    2. Select "TILT SEN" in the "Data monitor" mode using CONSULT-III.
    3. Check the tilt sensor signal under the following condition.
      TILT SENSOR SIGNAL CHECKING CONDITIONS

      Monitor item Condition Value
      TILT SEN Tilt position Change between
      1.1 V (Close to top)
      3.9 V (Close to bottom)

      Is the indication normal? 

      YES: INSPECTION END

      NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals