LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2009 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Seats >> Automatic Drive Positioner -- Convertible >> DTC/Circuit Diagnosis >> Power Walk-In Switch >> Component Inspection

Component Inspection

  1. CHECK POWER WALK-IN SWITCH
    1. Turn ignition switch OFF.
    2. Disconnect power walk-in switch connector.
    3. Check continuity between power walk-in switch terminals.
      CONTINUITY CONDITIONS

      Power walk-in switch Condition Continuity
      Connector Terminal
      B513 30 32 Power walk-in switch Pressed Existed
      Released Not existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace power walk-in switch (Built in walk-in lever). Refer to "EXPLODED VIEW ".

scientia non olet · About LEMON Manuals