Diagnosis Procedure
- PERFORM SELF-DIAGNOSIS
With CONSULT-III
- Turn the ignition switch from OFF to ON.
- Perform RAS control unit self-diagnosis.
Without CONSULT-III
- Start the engine.
- Perform the self-diagnosis. Refer to "DIAGNOSIS DESCRIPTION ".
Is DTC "C1905", "C1908", "C1922", "C1925", "C1928" or "RAS warning lamp flickering pattern:11" detected?
YES: Replace RAS control unit. Refer to "EXPLODED VIEW ".
NO: GO TO 2.
- CHECK INFORMATION
With CONSULT-III
Check the "DATA MONITOR" value of each DTC detected with the self-diagnosis function. Refer to "REFERENCE VALUE ".
Is each data the standard value?
YES: Check each harness connector pin terminal for disconnection.
NO: Replace RAS control unit. Refer to "EXPLODED VIEW ".