Diagnosis Procedure

Lock/unlock door with door request switch.

Refer to "DOOR LOCK FUNCTION : SYSTEM DESCRIPTION ".

Is the operation normal? 

YES: GO TO 2.

NO: Check door lock function. Refer to "DRIVER SIDE : DIAGNOSIS PROCEDURE ".

Perform "INSIDE ANT DIAGNOSIS" on "Work Support" of "INTELIGENT KEY".

Refer to "INTELLIGENT KEY : CONSULT-III FUNCTION (BCM - INTELLIGENT KEY) ".

GO TO 3.

Perform Self Diagnostic result of "INTELIGENT KEY".

Refer to "INTELLIGENT KEY : CONSULT-III FUNCTION (BCM - INTELLIGENT KEY) ".

Is DTC detected? 

YES: Refer to "DTC LOGIC " (instrument center), refer to "DTC LOGIC " (console), refer to "DTC LOGIC " (luggage room).

NO: GO TO 4.

Check push-button ignition switch.

Refer to "COMPONENT FUNCTION CHECK ".

Is the inspection normal? 

YES: GO TO 5.

NO: Repair or replace malfunctioning parts.

Confirm the operation again.

Is the inspection normal? 

YES: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".

NO: GO TO  1.