Oil Pump: Assembly

Install O-ring to oil pump cover.

Fig 1: Identifying Oil Pump Cover O-Ring
Courtesy of NISSAN MOTOR CO., U.S.A.
Install O-ring to oil pump housing.

Fig 2: Locating Oil Pump Housing O-Ring
Courtesy of NISSAN MOTOR CO., U.S.A.
Using the drift, install oil pump housing oil seal to the oil pump housing until it is flush.
CAUTION:
- Never reuse oil seal.
- Apply ATF to oil seal.
  
  Fig 3: Tapping Oil Pump Housing Oil Seal
  Courtesy of NISSAN MOTOR CO., U.S.A.
Install oil pump housing to oil pump cover.
Tighten bolts (<==) to the specified torque in numerical order shown in the figure after temporarily tightening them.

Fig 4: Locating Oil Pump Housing Bolts
Courtesy of NISSAN MOTOR CO., U.S.A.