LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2009 >> EX35 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Mirrors) >> With ADP >> Ecu Diagnosis >> Driver Seat Control Unit >> DTC Index

DTC Index

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
DTC INDEX

CONSULT-III display Timing*1 Item
Current malfunction Previous malfunction
CAN COMM CIRCUIT [U1000] 0 1-39 CAN communication
SEAT SLIDE [B2112] 0 1-39 Seat slide motor output
SEAT RECLINING [B2113] 0 1-39 Seat reclining motor output
TILT SENSOR [B2118] 0 1-39 Tilt sensor input
TELESCO SENSOR [B2119] 0 1-39 Telescopic sensor input
DETENT SW [B2126] 0 1-39 Detention switch condition
UART COMM [B2128] 0 1-39 UART communication
*1
  • 0: Current malfunction is present
  • 1-39: Displayed if any previous malfunction is present when current condition is normal. The numeral value increases by one at each IGN ON to OFF cycle from 1 to 39. The counter remains at 39 even if the number of cycles exceeds it. However, the counter is reset to 1 if any malfunction is detected again, the normal operation is resumed and the ignition switch is turned from OFF to ON.