LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2009 >> EX35 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Automatic Drive Positioner) >> On-Vehicle Repair >> Driver Seat Control Unit >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: When removing and installing, use shop cloths to protect parts from damage.
  1. Remove the driver seat (1). Refer to "REMOVAL AND INSTALLATION ".
  2. Remove the mounting bolts (A).
  3. Remove driver seat control unit (2).
    Fig 1: Identifying Driver Seat Control Unit And Mounting Bolts
    G05728108Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals