Component Inspection

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.

CHECK DETENTION SWITCH

Turn ignition switch OFF.
Disconnect control device connector.

Check control device terminals.

CONTINUITY CHART

Control device		Condition		Continuity
Terminal		Condition		Continuity
10	11	Selector lever	P position	Existed
10	11	Selector lever	Other than above	Not existed

Is the inspection result normal?

YES: INSPECTION END

NO: Replace control device. Refer to "2WD : REMOVAL AND INSTALLATION ".