LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2009 >> EX35 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Meter, Warning Lamp & Indicator) >> Function Diagnosis >> Compass >> Description >> Zone Variation Setting Procedure

Zone Variation Setting Procedure

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press and hold the compass switch for 3 - 9 seconds.
  2. The current zone setting appears on the compass display.
  3. Find the current geographical location number in Fig 1.
  4. Select the new zone number. (Press the compass switch until the new zone number appears on the compass display.)
  5. After select the new zone number, the compass display will automatically shows a direction within a few seconds.
  6. Perform CALIBRATION PROCEDURE  for more accurate indications.
    Fig 1: Identifying Compass Zone Variation Diagram
    G04923079Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals