LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2009 >> EX35 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Door & Lock) >> Function Diagnosis >> Intelligent Key System >> Welcome Light Function >> System Description >> System Setting Procedure

System Setting Procedure

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.

Setting of welcome light function can be changed by following procedure. (for system setting by CONSULT-III: refer to CONSULT-III FUNCTION (BCM - INTELLIGENT KEY)  .)

  1. Confirm Intelligent Key is removed from key slot.
  2. Turn ignition switch ON and press and hold request switch (driver side) more than 5 seconds.
  3. Confirm sounds of buzzer (combination meter).

    Pi, Pi, Pi... (approx. 1.2 sec.): Welcome light function is OFF. 

    Pi, Pi, Pi...(approx. 2.4 sec.): Welcome light function is ON. 

scientia non olet · About LEMON Manuals