LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2009 >> EX35 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Maintenance) >> On-Vehicle Maintenance >> Chassis Maintenance >> Transfer Fluid >> Refilling

Transfer Fluid: Refilling

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove filler plug (1) and gasket. Then fill fluid up to mounting hole for the filler plug.

    Fluid and viscosity:  Refer to FLUIDS AND LUBRICANTS  .

    Fluid capacity:  Refer to GENERAL SPECIFICATIONS .

    CAUTION: Carefully fill the fluid. (Fill up for approximately 3 minutes.)
  2. Leave the vehicle for 3 minutes, and check the fluid level again.
  3. Set a new gasket onto filler plug and install it on transfer and tighten to the specified torque. Refer to EXPLODED VIEW .
    CAUTION: Never reuse gasket.
    Fig 1: Identifying Filler Plug
    G05224027Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals