Work Step

When removing instrument panel assembly, combination meter, AV control unit, center console assembly take steps in the order shown by the number below.

COMPONENTS REFERENCE

PARTS	INSTRUMENT PANEL ASSEMBLY	COMBINATION METER	AV control unit	CENTER CONSOLE ASSEMBLY
Selector lever knob	[1]	-	[1]	[1]
Console finisher assembly	[2]	-	[2]	[2]
Console rear finisher	[3]	-	-	[3]
Rear ventilator duct	[4]	-	-	[4]
Center console assembly	[5]	-	-	-
Instrument side finisher LH	[6]	-	-	-
Instrument lower panel LH	[7]	-	-	-
Steering wheel	[8]	-	-	-
Steering column cover	[9]	[1]	-	-
Combination switch	[10]	[2]	-	-
Cluster lid A (upper)	[11]	[3]	-	-
Cluster lid A	[12]	[4]	-	-
Combination meter	[13]	[5]	-	-
Front body side welt LH	[14]	-	-	-
Front pillar garnish LH	[15]	-	-	-
Speaker grille LH	[16]	-	-	-
Center speaker grille	[17]	-	-	-
Center speaker	[18]	-	-	-
Instrument side panel LH	[19]	-	-	-
Cluster lid C	[20]	-	[3]	-
Cluster lid D	[21]	-	[4]	-
Display unit	[22]	-	[5]	-
AV control unit	[23]	-	[6]	-
Push button ignition switch	[24]	-	-	-
Front defroster grille LH	[25]	-	-	-
Front defroster grille RH	[26]	-	-	-
Instrument side finisher RH	[27]	-	-	-
Glove box assembly	[28]	-	-	-
Instrument lower cover	[29]	-	-	-
Instrument lower panel RH	[30]	-	-	-
Instrument side panel RH	[31]	-	-	-
Front body side welt RH	[32]	-	-	-
Front pillar garnish RH	[33]	-	-	-
Speaker grille RH	[34]	-	-	-
Instrument panel assembly	[35]	-	-	-
[]: Number indicates step in removal procedures.

CAUTION: When removing, always use a remover tool that is made of plastic.