Inspect The Function Of The Anti-Pinch System
- Fully open the door glass.
- Place a wooden piece (wooden hammer handle, etc.) at near fully closed position.
- Perform fully closing operation with auto up switch.
- Check that the glass reverses without pinching the wooden piece, is lowered approximately 150 mm (5.906 in) or for more than 2 seconds and then stops.
- The glass should not be raised with power window main switch operated while it is reversing or lowering.CAUTION:
- Be careful not to be pinched.
- Check that the auto up function is normal before the inspection following the system initialization.