LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2009 >> EX35 Base, AWD >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> On-Vehicle Repair >> Sunroof Unit Assembly >> Removal and Installation >> Installation

Removal and Installation: Installation

CAUTION: After installing the sunroof unit assembly and glass lid, perform the leak test and check that there is no malfunction.
  1. Bring sunroof unit into back door.
  2. Temporarily tighten the mounting nuts to the side rail of sunroof unit assembly.
  3. Temporarily tighten the mounting nuts to the front end of sunroof unit assembly.
  4. Temporarily tighten the mounting bolts to the sunroof brackets (LH/RH)
  5. Tighten the installation points diagonally excluding the installation points of the sunroof brackets around the roof opening.
  6. Tighten the mounting nuts to the front end and side rail.
  7. Tighten the sunroof bracket bolts of the vehicle side, and then tighten the bolt of the rail side.
  8. Install the assistance grip bracket.
  9. Install the sunroof motor assembly. Refer to "REMOVAL AND INSTALLATION ".
  10. Install the glass lid. Refer to "REMOVAL AND INSTALLATION ".
    NOTE: After installation, perform fitting adjustment. Refer to "ADJUSTMENT ".
  11. Connect drain hoses.
  12. Install the headlining. Refer to "SUNROOF : REMOVAL AND INSTALLATION ".
scientia non olet · About LEMON Manuals