LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> QX56 AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Introduction >> Function Diagnosis >> On Board Diagnostic (OBD) System >> Generic Scan Tool (GST) Function >> Inspection Procedure

Inspection Procedure

  1. Turn ignition switch OFF.
  2. Connect GST to data link connector, which is located under LH dash panel near the hood opener handle.
    Fig 1: Connecting CONSULT-II And CONSULT-II CONVERTER To Data Link Connector
    G05739312Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Turn ignition switch ON.
  4. Enter the program according to instruction on the screen or in the article.

    (*: Regarding GST screens in this section, sample screens are shown.)

    Fig 2: GST Sample Screens Display
    G05739313Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Perform each diagnostic service according to each service procedure.

    For further information  , see the GST Operation Manual of the tool maker  .

    Fig 3: Generic Scan Tool Screen Display - READINESS TESTS
    G05739314Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals