LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> QX56 AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System >> Removal And Installation >> Steering Angle Sensor >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Remove spiral cable. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove the screws and remove the steering angle sensor.
    CAUTION: In the case that the ABS actuator and electronic unit (control unit) is replaced, make sure to adjust position of steering angle sensor. Refer to "ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION : SPECIAL REPAIR REQUIREMENT ".
scientia non olet · About LEMON Manuals