Inspection Procedure

1. Turn ignition switch OFF.
2. Disconnect VDC OFF switch connector.
3. Check continuity between VDC OFF switch terminals.
   CONTINUITY REFERENCE CHART
   
   

   VDC OFF switch	Condition	Continuity
   Terminal
   1 - 2	When VDC OFF switch is pressed.	Yes
   	When VDC OFF switch is released.	No

   Fig 1: Identifying Continuity Between VDC OFF Switch Terminals

   Courtesy of NISSAN MOTOR CO., U.S.A.

Is the inspection result normal? 

YES: INSPECTION END

NO: Replace VDC OFF switch.