Side Step: Reassembly

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL NO. 3 SIDE STEP BRACKET LH
1. Install the 2 side step brackets with the 4 bolts.
  Torque: 12 N*m (122 kgf*cm, 9 ft.*lbf)
  
  Fig 1: Identifying Side Step Brackets Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 2 SIDE STEP BRACKET LH
1. Install the side step bracket with the 2 bolts.
  
  Fig 2: Identifying Side Step Bracket Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 12 N*m (122 kgf*cm, 9 ft.*lbf)
INSTALL SIDE STEP BRACKET LH
1. Install the side step bracket with the 2 bolts.
  
  Fig 3: Identifying Side Step Bracket Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 12 N*m (122 kgf*cm, 9 ft.*lbf)
INSTALL STEP ARM SPACER LH
INSTALL STEP COVER PROTECTOR LH
INSTALL STEP PLATE COVER LH
1. for Double Cab:
  Install the step plate cover.
  1. Attach the 19 clips to install the step plate cover.
    
    Fig 4: Identifying Step Plate Cover Clips
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. for CrewMax:
  Install the step plate cover.
  1. Attach the 23 clips to install the step plate cover.
    
    Fig 5: Identifying Step Plate Cover Clips
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002