LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2008 >> M45 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Transfer Case -JF1A) >> 4WD Control Switch >> Installation

4WD Control Switch: Installation

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL 4WD CONTROL SWITCH 
    1. Attach the 3 claws to install the switch.
  2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY  (See INSTALLATION )
    Fig 1: Identifying 4WD Control Switch Claws
    G05159094Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals